Model A Electriscreen: Owner’s Manual
7
Installing the high voltage switch control (standard)
A standard 3-position wall switch is supplied. The high voltage control is
connected to the electrical source. It alternates directions of screen motion
by means of the hot lead, using the 3-position switch.
Preparing the connection
Before making the electrical connections, you need:
An available AC constant power source
A 4-conductor romex or motor connector cable
Making the connections
The diagram in Figure 6 illustrates the connections.
1. Connect the wall switch to the AC constant power source.
2. Connect the wall switch to the screen unit’ s electrical box.
Figure 6:
High voltage control wiring diagram
Screen Switch
AC Power
Source
DOWN-Black
UP-Red
Line (Hot)
COMMON-White (Neutral)
GROUND-Green
Warning!
Do not connect multiple high voltage control switches to one
screen motor. For custom switching applications, contact the
factory.
