MC850 Operations Manual Rev F
Page 16
Table of Contents
Top
7.2.2
Setup Tab
7.2.2.1
Name Section
The amplifier and channel names can be entered in the upper left section of the
Setup Tab. When the Save button below the entry boxes is pressed, the new
channel and device names are propagated through all tabs of the application. To
avoid confusion, it is recommended that these identifiers be the same as those used
in Dante Controller, but the choice is left to the user.
7.2.2.2
IP Address Section
The default condition for the MC850 is to receive a control port IP address
automatically from the DHCP server. However if a static IP address is
desired, this section provides a mechanism to assign that address. Use
care when exercising this option as setting an IP address that is not in the
same subnet as the controlling PC will result in a failure to discover the
device.
7.2.2.3
Channel Control Section
To the right of the Name section is the Channel Control section. Pairs of channels
(corresponding to one of the physical amplifiers) can be enabled or disabled.
When disabled, the PWM switching of the amplifier is halted. While this does not
save a significant amount of energy, it ensures absolute silence at the speakers for
the disabled channel pair.
