background image

LIMITED ONE (1) YEAR WARRANTY ON STEWART FILMSCREEN
CORP PROJECTION SCREENS SYSTEM

STEWART FILMSCREEN CORPORATION (Stewart) warrants its screens to
the original purchaser only, to be free from defects in materials and
workmanship for a period of one (1) year from the date of purchase by the
original purchaser or eighteen (18) months from date of manufacture, as
defined in the serial number, provided they are properly operated and
maintained according to Stewart instructions and are not damaged due to
improper handling or treatment after shipment from the factory.

This warranty does not apply to equipment showing evidence of misuse,
abuse, or accidental damage, including neglect caused by improper
installation (i.e. proximity to hot lights, exposure to extreme heat or cold,
exposure to excessive humidity, etc.) as well as product that have been
tampered with or repaired by any person or third party installation, other
than authorized Stewart personnel.

Stewart's sole obligation under this warranty shall be to repair or to replace
(at Stewart's sole discretion) the defective part of the merchandise. This
warranty expressly does not cover any costs of removal, installation,
framing, or other costs incident to replacing the screen or returning it to
Stewart.  Returns for service should be made to your Stewart dealer. If it is
necessary for the dealer to return the screen or part to Stewart,
transportation (freight) expenses to and from Stewart are payable by the
purchaser and Stewart is not responsible for damage in shipment.  To
protect yourself against damage or loss in transit, insure the product and
prepay all transportation expenses.

This warranty is in lieu of all other warranties, expressed or implied,
including warranties as to fitness for use and merchantability.  Any implied
warranties of fitness for use, or merchantability, that may be mandated by
statue or rule of law are limited to the one (1) year warranty period.  This
warranty gives you specific legal rights, and you may also have other rights
which vary from state-to-state. In no event will Stewart be liable for sums in
excess of the purchase price of the product.  No liability is assumed by
Stewart for expenses or damages resulting from interruption in operation of
equipment, or for incidental, direct, or consequential damages of any
nature.

In the event that there is a defect in materials or workmanship of a Stewart
Screen, you may contact our Customer Service Department at 
1161 W Sepulveda Blvd, Torrance, California 90502-2797 
(310-784-5300) Toll free (800-762-4999).

IMPORTANT:  

This warranty shall not be valid and Stewart shall not be

bound by this warranty if the product is not operated and maintained in
accordance with Stewart's written instructions.

Stewart Filmscreen Corporation shall not be liable for any and all
consequential damage(s) occasioned by the breach of any written or
implied warranty pertaining to the sale in excess of the purchase price
of the product sold.

Printed in USA. Rev. 12/14/10

16

Stewart Filmscreen Corporation

P

RODUCT

W

ARRANTY

Содержание ABT-EM Trapdoor ElectriMask Electriscreen





















Отзывы: