Note:
This manual refers to “AC” to represent electrical power. Your
location may use 120 V, 220 V or other electrical power. Screen systems
are manufactured using the electrical power type specified for the location.
Use appropriate power sources for your location.
Unpacking
1. Do not remove the wrapping paper rolled with the screen. You
should remove it only after the unit is hung and all electrical
connections have been made.
2. Remove the batten lock-down screws located on the back side of
the case
AB Electriscreen: Owner’s Manual
3
Caution
During installation, do not place the unit on an unstable
cart, stand, table, or ladder. The unit may fall, causing injury
to a child or adult and damage to the unit.
Warning!
Failure to remove the batten lock-down screws can result in
permanent damage to the screen.
Factory Advisory
The factory advises against installing a concealed or
recessed electrical projection screen permanently. You
must be able to access the external end plates should
future service to the screen roller assembly be necessary.
Suggested solutions for removing the unit include:
A removable ceiling cover plate under the mounting
location.
Access to the unit through an attic or overhead space.