84152/84158 COMPACT ISLAND DESKS
STEP-BY-STEP INSTALLATION
3
3249.IDS-84152/84158.7/26/12
©2012 Stevens Industries, Inc. Due to continuing product development, Stevens reserves the right to change specifications without notice.
I.D.SYSTEMS
TM
#0964-2938
S
i
l
i
cone Sealant
(typ
.
)
Molded Corner
Brackets
(typ
.
)
Front Ra
i
ls
(typ
.
)
Drilled
Access
Holes
Levelers
14
Note that there are two (2) front corner Levelers
located behind each Base Cabinet toe kick and
accessible through drilled access holes in cabinet
floor. Remove plastic plugs from access holes in
order to perform leveling adjustments in next step.
10
Attach 4-Drawer Base Cabinet to Back Panel,
using four (4) 1 1/4" Screws through predrilled
holes in Mounting Rails. Remove Clamps.
11
Apply silicone sealant to Base Cabinet and
Apron Assembly Front Rails and Molded Corner
Brackets, as illustrated below.
12
Place Countertop on top of Desk Assembly,
centering it side-to-side and overhanging
the Back Panel by 1/2". There should be
approximately 3/4" overhang on sides and 2"
overhang at the front. Clamp Countertop down to
Base Cabinet Front Rails, if required, until sealant
is set.
(top view)
CAUTION!
Countertops are quite heavy.
Please use caution when handling.
Do not attempt to handle without additional assistance.
13
Position Desk Assembly in desired location.
Approx
.
2
"
Front Overhang
(end view)
Approx
.
1/2
"
Back Overhang
Back Panel
Base Cab
i
net
Mount
i
ng Ra
i
ls
1 1/4
"
Screws
(typ
.
)
