
22
In the
“CROSSOVER”
menu, each short press on the
ENCODER
changes the
parameter being edited, between output, filter type, frequency and attenuation/
topology. To select another output channel for editing, short press the
HOTKEY
key on the corresponding output.
frequency cancellations.
The adjustment can be carried out as
follows:
• Crossover
This function allows precision definition of the cutoff frequencies for the high-
pass filter and the low-pass filter, as well as filter attenuations and topology
individually by output. The available filters and attenuations are:
• Balance / Delay
This function allows for the digital alignment of transducers (speakers) via the
time correction performed by the DSP, and ensures that the sound from all
the speakers arrives at the listener with improved audio fidelity while avoiding
HPF: Butterworth 12/18/24/36/48 dB/8ª
Linkwitz-Riley 12/18/24/36/48 dB/8ª
LPF: Butterworth 12/18/24/36 dB/8ª
Linkwitz-Riley 12/18/24/36 dB/8ª
Case Front
Panel
Reference (*)
1.
Identify the coil farthest from the
listener or the front panel of the box.
This coil will be used as a reference;
2.
Measure the distance from the other coils to
the reference coil. These are the distances used in
configuring the delay of each output channel.