A. Assembly
Please refer to the instruction manual for assembly. The diagrams will help you
assemble the machine correctly.
If a part is missing or damaged, do not use the mower and return it to your retailer.
1 - Fitting the grass box
• Raise the rear cover.
• Hold the grass box by its handle and lift it, then place it under the rear cover so that
the hooks on the frame of the grass box fit into the support grooves on the handle.
• Release the rear cover. When the grass box is correctly fitted, the hooks sit firmly in
the grooves.
2 - Installing the Mulching plug
• Raise the rear cover and hold it up.
• Hold the Mulching plug by its handle and insert it while angling it slightly, as shown.
• Push the Mulching plug fully in
• Lower the rear cover.
B. Starting the mower
Do not start the mower unless it is fully assembled. Check that the battery is
properly installed and the machine correctly assembled.
To start the mower, push the contact key into its keyhole. Hold the starting
button down. Lift the switch lever towards the top of the handle, then release
the starting button.
CAUTION: When the mower is has been switched off, the blades continue
to turn for a few seconds; do not touch the underside of the mower. Wait
for the blades to stop completely before taking further action.
INSTRUCTIONS FOR USE
103
EN
