STERWINS 3276007376067, Юридические и техника безопасности инструкции

Страница: 76 / 101

4.TECHNICAL SPECIFICATIONS
Model EPS2-20.3
Rated voltage 220-240V~50HZ
Rated power 750W
no-load speed 6000/min
Oil tank capacity 60cm
3
Net Weight 3.1kg
The emission values as below according to EN 62841
Measured sound pressure level
86.8 dB(A), K=2.5 dB (A)
Measured sound power level 102.4 dB(A), K=2.5 dB (A)
Guaranteed sound power level
105 dB(A)
Front handle vibration emission
2.08m/s 2
Rear handle vibration emission
2.87m/s 2
Uncertainty
K=1.5m/s²
Saw chain type
91PJ033X
Guide bar type
080SDEA041
Oil type Anti-wear hydraulic oil
Bar length 20 cm
Cutting length(Max) 20 cm
That the declared vibration total value(s) and the declared noise emission value(s) have been
measured in accordance with a standard test method and may be used for comparing one
tool with another.
− that the declared vibration total value(s) and the declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
In order to yourself safety,please follow the technical specification accessories.
The sound intensity level for the operator may exceed 85dB(A) and ear protection measures
are necessary.
WARNING!
That the vibration and noise emissions during actual use of the power tool can
differ from the declared values depending on the ways in which the tool is used especially
what kind of workpiece is processed. Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).Depending on the actual use of the product the vibration values can
differ from the declared total! Adopt proper measures to protect yourself against vibration exposures!
Take the whole work process including times the product is running under no load or switched off into
consideration! Proper measures include among others regular maintenance and care of the product
and application tools, keeping hands warm, periodical breaks and proper planning of work processes!
75
EN