STERWINS 20 VGT2-28.1, Инструкция по сборке, использованию и обслуживанию

Страница: 295 / 309

297
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
Problems Probable causes Solutions
Qualifi cation
required
Product does
not reach full
power
Battery pack capacity too
low
Charge battery pack
-
Air vents are blocked Clean the air vents
Vibration
or noise is
excessive
Bolts/nuts are loose Tighten bolts/nuts -
Trimming spool is damaged
Have it replaced with a new
one
-
Result is
unsatisfactory
Trimming spool is running
out of wire nylon
Refi ll it or have it replaced
with a new one (maintenance
chapter)
-
Thickness of branches
exceeds capacity
Only cut branches within the
limits
-
Product
suddenly stops
Battery pack discharged
Remove and charge battery
pack
-
Battery too hot
Remove battery pack and let it
cool down
9. END OF LIFE
Electrical products should not be discarded with household products. Used electrical products
must be collected separately and disposed of at collection points provided for this purpose.
Talk with your local authorities or dealer for advice on recycling.
10. WARRANTY
10.1 OUR WARRANTY
STERWINS products are designed according to the highest quality standards for products intended for
the consumer market. This sale warranty covers a period of 3 years as of the date of purchase of the
product. This warranty covers all defects in materials and workmanship: missing parts and elements,
and damage occurring under normal use circumstances. Repair and replacement of parts do not lead
to an extension of the initial warranty period. You must be able to provide proof of the purchase for this
product and the date of purchase. Warranty coverage is limited to the value of this product.
10.2 WARRANTY EXCLUSIONS
This warranty does not cover problems nor incidents resulting from incorrect use of the product.
The following items are not covered by warranty :
- The tool have been used incorrectly; or
- Damage occurring upon transporting or setting up this product; or
- Repairs and/or change of parts carried out by a third party; or
- Damage caused by external factors or foreign objects such as sand or stones; or
- Damage resulting from non-compliance with the safety and usage instructions; or
- The tool have been disassembled or opened; or
- The tool have been in a wet environment (dew, rain, submerged in water...); or
- The tool has been used for professional purpose; or
- The tool has been exposed to a temperature out of the range specifi ed in chapter "storage"