CUSTOMER SERVICE
Troubleshooting Tips
• If all lights are out, make sure there is power to the outlet or extension cord by plugging another product into that outlet, and make sure if the
outlet is controlled by a switch or timer that it is turned on. If connected to an outlet protected by a GFCI, reset the GFCI outlet or breaker.
• If one bulb is not functioning, replace it with the spare bulbs provided.
• If part of the lights are not functioning (example if half of the bulbs are not lighting), make sure all bulbs in that section are fully inserted.
Starting at one end, replace a non-working bulb with one of the spare and keep repeating with the spare bulb in each unlit socket until entire
set lights.
• Make sure wires are in position to make contact with brass contacts inside lamp holder.
To replace a bulb:
• Unplug unit, grasp plug and remove from outlet device. Do not unplug by pulling on cord.
• USE only the included spare bulbs for replacements, and only replace with the same color bulbs.
• Insert the spare bulb into the lamp holder in correct direction and screw the bulb in place.
• Do not switch the order of the colors of the bulbs or interchange bulbs from different sets.
To replace a fuse:
• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
• Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
• Remove fuse carefully.
• Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse (provided with product).
• Close the fuse cover. Slide closed the fuse access cover on top of attachment plug.
• Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
FOR INDOOR AND OUTDOOR USE
NOT CONNECTABLE
DIMMABLE LIGHTS - DIMMER NOT INCLUDED
Stringlight Assembly
• Screw in the bulb by turning clockwise.
