4.
Installation Tips
•
Never push fixture into the ground by the fixture head.
•
If the soil is of a loose, sandy or organic type
, grasp the post with both hands near the spike and firmly push into the ground.
•
If the soil is hard
, pour some water onto the ground to soften it.
•
If the soil is stony
, soften the ground with a rake or shovel and remove large rocks. Dig a small hole, insert the fixture spike, replace the soil
and tap down.
5
.
Troubleshooting
If the light does not turn on at dusk after 8 hours of charging:
• Ensure that the solar light is in a bright sunny location and not in a shady area during the day.
• Make sure that the light’s photocell is not affected by other light sources at night.
• Verify that the battery is making contact with the terminal and that it has been inserted in the correct polarity.
• Ensure the switch is in the WH or CLR position.
7.
CAUTION
• Safe for outdoor operation.
• Failure to insert battery/batteries in the correct polarity, as indicated in the battery compartment, may shorten the life
of the battery/batteries or cause battery/batteries to explode or leak.
• Do not mix old and new batteries. Replace all batteries of a set at the same time.
• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries.
• Do not dispose of batteries in fire.
• Batteries should be recycled or disposed of as per manufacturer’s recommendations and/or per state and local regulations. Do not
dispose of batteries in fire or short circuit. Batteries should be recycled or disposed of properly. Do not ingest.
• Remove battery/batteries if consumed or if product is to be left unused for a long period.
• REPLACEMENT PARTS MAY BE ORDERED BY USING THE FIXTURE MODEL NUMBER AND THE PART’S NAME.
Made in China
6.
Battery Replacement
NOTE : This operation should be done in the
morning on a sunny day. This will allow the solar
fixture to receive a full 8 hours of sunlight so that the
rechargeable battery can reach maximum capacity.
• Remove the cover by turning it.
• Remove the 2 screws that hold the battery cover.
• Remove the old battery and replace with 1 new
2/3 AA size 1.2V rechargeable battery of same or
greater mAh.
(USE RECHARGEABLE BATTERIES ONLY).
Note
: Clean the battery contacts and those of the
device prior to battery installation.
• Be sure to insert the battery in the
proper direction.
• Replace the cover and the 2 screws.
Battery
CUSTOMER SERVICE
