6
7
BATTERY REPLACEMENT
DETECTION
RANGE
DELAY IN TIME
SECURITY TIME
COMFORT FLUSH
DELAY OUT TIME
TEMPORARY OFF
FUNCTION
RESET
SELF ADJUSTMENT
MODE
HYGIENE FLUSH
Adjusting the settings with the remote control
If necessary, the sensor settings can be adjusted as following:
Shut off the water supply. In order to adjust the sensor with the remote control, hold
the remote control straight in front of the sensor in a distance of about 6-8” (15-20cm).
Choose the function you want to adjust by pressing once on one of the function buttons.
After pressing once on a specific function button, a quick flashing of the LED at the
front of the sensor will occur. At this stage, you can change the setting by pressing the
(+) or the (-) buttons, every push will increase or decrease one level. After finishing the
adjustment, turn the water supply back on.
SETTINGS ADJUSTMENT
When the battery weakens, the red indicator light will blink at a constant rate. The battery
must be replaced within two weeks.
IMPORTANT: Spent batteries should not be disposed of with normal household
waste. Contact your local authority for information on waste disposal and
recycling.
3 .Remove the old batteries
2 .Carefully open the battery box
1. Unscrew the holding
screw
5. Close the box
4. Replace the used batteries
with a new 6 X 1.5V batteries
(Lithium battery is recommended).
New Batt
ery
Old Batter
y
