6
7
fAuCET INSTALLATIoN
2
Remove the protective sticker from the
sensor
3
Wait a few seconds before activating
the faucet. If the range is unsatisfactory,
refer to the section titled “Settings
adjustment”.
15
SECONDS
ABOUT
SETTINgS ADjuSTMENT
Remove
Adjusting the settings with the remote control
If necessary, the sensor settings can be adjusted as following:
Shut off the water supply. In order to adjust the sensor with the remote control, hold
the remote control straight in front of the sensor in a distance of about 6-8” (15-20cm).
Choose the function you want to adjust by pressing once on one of the function buttons.
After pressing once on a specific function button, a quick flashing of the red light at the
front of the sensor will occur. At this stage, you can change the setting by pressing the
(+) or the (-) buttons, every push will increase or decrease one level. After finishing the
adjustment, turn the water supply back on.
DETECTION
RANgE
DELAY IN TIME
SECURITY TIME
COMFORT FLUSh
DELAY OUT TIME
TEMPORARY OFF
FUNCTION
RESET
SELF ADjUSTMENT
MODE
hYgIENE FLUSh