19
21
17
25
26
27
FIRST-TIME SETUP CONTINUED
15. Cut nylon strapping and remove
protective strap corner guards
16. Locate the factory keys, either on
the shooter rod or taped to the
playfield glass.
17. Using the snips, cut the tie-wrap
securing the keys if required. One
set of keys is for the front coin
door, the other set of keys is for
accessing components in the
backbox
18. Open the front coin door.
19. Reach into the game and remove
the retaining clip at the rear of the
cash box.
20. Remove the cash box lid by sliding
it toward you.
21. Store the backbox keys, if desired,
on the metal hook located in the
coin door.
22. Locate and remove the pinballs,
plumb bob, and backbox bolts
from the cash box.
23. Replace the cash box lid and
retaining clip for future use.
24. Locate the two (2) backbox bolts in
the cash box.
25. Carefully raise backbox to upright
position while ensuring that cables
are not pinched.
26. Use the ⅝” wrench to Install the
two (2) backbox bolts to secure the
backbox as indicated on the back
of the cabinet.
29. Remove the playfield glass by
sliding it toward you and carefully
place it in a safe location.
Remove all playfield shipping
tie downs, shipping blocks, and
packing foam, and follow any
game-specific unpacking instruc-
tions included in the playfield, if
present.
CAUTION: PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED
GLASS. TEMPERED GLASS IS SENSITIVE TO EXTREME TEMPERATURE SHIFTS
AND CORNER NICKS, WHICH CAN CAUSE THE GLASS TO FAIL CATASTROPHICAL-
LY. TAKE CARE TO STORE THE GLASS ON A SOFT, ROOM-TEMPERATURE SUR-
FACE AND PREVENT THE CORNERS FROM BEING DAMAGED.
27. Reach inside the cabinet and
move and hold the yellow top
molding lock handle to the left.
28. Remove the front top molding and
then release the handle.
4
SETUP AND MOVING
KISS PREMIUM EDITION MANUAL #500-55H3-01
© 2015 KISS Catalog, Ltd.
Under License to Epic Rights.
To Purchase This Game, Visit BMI Gaming | www.bmigaming.com | Or Contact International Sales at + 561-391-7200 (USA)
