Sterling Power Products DAI-1500C-12 Series, Руководство пользователя, Страница: 6 / 27

-
3
-
Sterling reserve the right with some models to supply an accredited installer with
replacement parts, this may allow the unit to become operable much quicker. In
this case
Sterling are not responsible for any costs of the installer’s time or
traveling expenses. Replacement parts are sent at Sterling's discretion.
Sterling will in no way be held responsible for any losses incurred
due to the malfunctioning or failure of a product.
Suitably qualified personnel must carry out wiring, failure to do so will void
warranty.
If you have any questions about this warranty please do not hesitate
to contact us.
Caution:
Even when a unit has been completely disconnected, there can
Still be deadly voltages present at the OUTPUT. To remove these voltages you
must switch the unit ON with the ON/OFF switch. After one minute the
electronics are discharged and any work can now be safely carried out.
Caution: In normal use lead-acid and lead-gel batteries give out explosive gases.
Never smoke or allow a spark or flame in the vicinity of batteries. The batteries
must always be stored or placed in a well ventilated area, they should be placed in
such a way that there is no danger of short circuiting through carelessness. Never
charge frozen batteries.
This unit is not to be used or sold for life support equipment or applications.
B.1 Special Precautions
While working on batteries there should always be a second person close to you or
within your voice range, in case help is needed.
Plenty of fresh water and soap must be ready at hand so that in case of acid
coming in contact with skin, eyes and clothes, the areas in question can be
thoroughly washed.
If acid enters the eyes, you must thoroughly wash the eyes with cold running water
for at least 15 minutes. It is recommended that you immediately consult a medical
doctor.
Baking powder neutralizes battery acid electrolyte. Always keep some at hand.
Special care must be taken when working with metal tools near or on the batteries.
With tools such as screwdrivers, spanners etc. short-circuits can result. Sparks
produced by the short-circuit can cause an explosion.
When working on batteries all personal metal items such as rings, necklaces and
bracelets must be removed. Batteries are so powerful that short-circuit with these
items can melt them and thus cause severe burns. Always follow the battery
manufacturers instructions.
Under certain conditions this unit or a connected generator can start
automatically. While working on an electrical installation you must ensure that
these appliances are disconnected before commencing any work.