Sterling Models Kingfish Sailboat, Инструкция по сборке

Страница: 3 / 17

Page
3
Assembly Instructions
Step 1 - Keel
If you are going to install radio control be sure to read step 6 before starting construction. Remove die-
cut parts from sheet. Drill 1/8” holes through #1, #2 and both #3’s. Cement #1 and #2 together on a flat
surface as shown in Figure 1 and allow to dry. As shown in Figure 1 , cement #4’s on both sides of #2, and
#3 on side shown between notches. Use wood model airplane cement to build the model.
Figure 1
Step 2 – Inner Deck
Insert inner deck #10 into bulkheads #7, #8 and #9. Push bulkheads down into notches in #10 and
cement in place. Cement bulkheads #6 and #11 in place as in Figure 2. Continue with step 3 to insure
keel and bulkhead alignment.
Figure 2