Steris Cmax, Руководство оператора

Страница: 43 / 218

4-10
150830-685 Operator Manual Operating Instructions
4.5.1 Auxiliary System
Operation
To operate system, proceed as follows:
1. Flip pedal down (see Figure 4-5).
2. Pull drawer out and remove auxiliary hand control.
3. Return drawer to table.
4. To operate table functions, pump pedal while pressing desired
function button on auxiliary hand control (see Figure 4-6).
NOTE: When using the auxiliary control system, note the following:
1) For UNLOCK and SLIDE functions, it is not necessary to pump
pedal.
2) Pressing any button on the auxiliary hand control deactivates
main hand control.
3) When any key is pressed on auxiliary hand control, the green
LED (see Figure 4-6) should light indicating system is active.
4) The ALS System is NOT active during auxiliary control
operation.
5) When table is in the auxiliary UNLOCK configuration, tabletop
functioning IS active. LOCK table before moving tabletop.
6) Reverse Orientation is NOT available in auxiliary control
operation. If patient was in reverse orientation when auxiliary
control was activated, change
TREND to REV. TREND , LEFT
TILT to RIGHT TILT , etc.
WARNING – PERSONAL
INJURY AND/OR EQUIPMENT
DAMAGE HAZARD:
• ALS System is not active
during Auxiliary Control.
Ensure proper tabletop
movements to prevent
patient/staff injury and/or
equipment damage.
• During Auxiliary Control,
tabletop functions are
available even if table floor
locks are NOT engaged.
LOCK table before moving
tabletop or transferring
patient.
Figure 4-5. Auxiliary Control System