Page 7 / 45
REV. STV20110519
Stainless Steel Pneumatic Actuator 51 (2”) & 76 (3”)
The stainless steel pneumatic actuator for valves
51
(2”) and
76
(3”) is sealed and not serviceable.
The actuator is bolted to the housing.
The pneumatic actuator is provided already pre-assembled with the adapter and adapter plate (see
figure 6).
The pneumatic actuator is spring/air. The cylinder is reversible and can be set-up as either spring
to close/air to open (normally closed), or spring to open/air to close (normally open).
Figure 6: Stainless Steel Pneumatic Actuator 51 (2") & 76 (3")
Manual Actuator 12 (1/2”) to 76 (3”)
The manually operated actuator is manufactured in stainless steel and is autoclavable. The
actuator is mounted in the same manner as with the pneumatic actuators.
An extended handle manual actuator is also available for bottom outlet valves. This option
makes the handle more accessible to the operator. See figure 8.
Figure 7: Manual Actuator 12 (1/2") to 76 (3")
Figure 8: Extended Manual Handle
