Matrix 1000 hints_______________________________________________________________________________________21
13. Matrix 1000 hints
Some orderless hints to get more out of your Matrix 1000.
•
If the Matrix does not make sound although the blinking of the last displaypoint indicates incoming
notes, please check the following:
◦
Volume knob on the Matrix itself is set to 0? … we're pretty sure you already knew this 'hint' :-)
◦
ENV2 AMP and VELO both set to 0? ENV2 is modulating VCA2.
◦
VCA1 AMP and VELO both set to 0?
◦
DCO Waveforms of DCO 1 & 2 OFF?
•
To save a patch on one of the RAM slots between 000 and 199: hold ENTER while typing 3 numbers
•
If one day your Matrix1000's voices do not sound the same anymore, are out of tune or completely
missing ... dont panic. First try the calibration routine:
◦
press SELECT until 'Ext. Func.' LED lights up
◦
press '7', then ENTER. The display shows '0'. Press ENTER again
◦
The display shows 'Cal' for 10-30 secunds
Synth Programmer for Oberheim Matrix - Operation manual V 1.6 – 05/2020
© Stereoping Germany, Meschede 2020
