8 x
Threaded screw M3 / 6 mm
6 x
Polyamid disc, for protecting your frontpanel against scratches
1 x
Power-connector cable for Eurorack-Power-Bus
2. Building the kit
Before we start ...
This building instruction assumes you are familiar with soldering. If you are not, there
are lots of excellent tutorials on the web.
Assembly should be finished within an hour. Please take your time, enjoy the process
of building your module, concentrate on what you are doing. It happens quite fast to
mix up two parts or solder one on the wrong side of the pcb.
If you consider yourself to be a professional, you probably will not need this
building instructions. The following three points must be taken in consideration
even by professionals to ensure everything fits together in the end:
1. The jacks will not center themselves perfectly by just putting them in
their drilling holes. We must center the jacks with help of the frontpanel
BEFORE we solder them.
2. The power-pinhead and both golden cinch-jacks will be mounted on the
backside of the pcb
3. The distance between pcb and frontpanel is just 10 mm. We have to
ensure the parts are placed as flat as possible on the pcb. The wires of the
resistors should be bent directly near their bod
Building instructions 'Eurorack Spring Reverb'
V1.0 - 06.2014
© Stereoping Germany, Hattingen 2014
