5
Mouse
1.- Plug the mouse into an available USB
port in the computer.
The system automatically will upgrade
required files. After installation, you can
start to use the mouse.
1.- Plug the lamp into an available USB port in the computer.
The lamp will turns on automatically .
2 .- Adjust flexible pipe according to your needs.
3.- To turn off the lamp, unplug it from USB port.
1.- Connect the cable from your
numeric keyboard to your computer’s USB
port. The operating system will automatically
detect the new hardware. After a few
seconds, you will be able to begin using the
keyboard.
2 .- If you want to place the keyboard in a
higher position, pull the support tab located
at the rear of the keyboard.
LED lamp
Numeric keyboard
