5
1.- Once the screen is installed and
fi
rmly attached, locate
the knob on the adjustment bars.
2.- Loosen them slightly so that the screen moves.
3.- Adjust the screen at the desired angle (Until 15°).
3. ANGLE ADJUSTMENT AFTER INSTALLATION
4.- Tight the knob.
The arm (C) has a screw to rotate the screen in
vertical axis 90° to 90° right or left.
Use the hole in the back of the stand to keep
cables more organized.
8.- Place the screen on the
stand using the fastenings
bars (B), tighten them to
prevent movement.
The screws are standard size, we recommend refer to the instruction manual of your
screen for more information about the necessary screws to the mounting.
Steren is not responsible for material damages, nor personal injuries caused by wrong use
or wrong installation. The user is responsible of correct installation and continuous check.
Product design and speci
fi
cations are subject to change without previous notice.
It is recommended that this step is done, for safety, between two people.
520-770mm
B