2-way passive speaker 450 Wpmpo set / SPK-1500BL
V0.
2
/
0620N
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of
purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when warranty service
is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by unauthorized
personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
Product: 2-way passive speaker 450 Wpmpo set
Number part: SPK-1500BL
Brand: Steren
IMPORTANT
• Don't place the speakers outdoor.
• Do not use or store the equipment near wet places. May
cause malfunction or shock hazard.
• Don't place the speakers near to a TV or monitor, may cause
interference in the sound.
• Make sure the volume control of your audio system is in
minimum level before using the speakers. Extreme sounds may
cause damages to your ears.
INSTRUCTIONS
INSTALLATION
Select a place to install the speakers. We recommend that are over a solid
surface (a wall, under a ceiling or marquee).
1
2
Make drill marks.
3
Remove the support from the speaker.
Loose the screws with an allen wrench
4
SPECIFICATIONS
Place the support into the speaker
again.
5
Make the drills and insert the anchors (not included). Place the speaker
and screw it a little, the screws must be slightly out.
6
To make drills, pay attention that does not
exist water pipes or electric wires.
To make the connections, insert the wires into
the correct connectors.
Red = positive
Black = negative
Adjust the position of the speaker and tighten
the screws when the angle is right.
Woofer: 127 mm (5")
Tweeter: 19 mm (0.75")
Power: 450 WPMPO, 35 Wrms
Impedance: 8 Ω
Frequency range: 60 Hz – 18 kHz
Sensibility: 89 db
We recommend use a cable POT type caliber
18 or 20
Before to use your new product, please read the manual.
(55) 15 16 60 00
