RMX-400
V0.0
0817A
HDMI remote control extender
Instruction manual
CAUTIONS
CONNECTION
OUT
IN
CEC IR
IR R
X
OUT
IN
CEC IR
IR R
X
IR
T
X
Before using your new Steren product, read this instruction manual to avoid any
malfunction.
The information shown in this manual is for product reference only. Due to updates
there may be differences. Please see our website www.steren.com.mx
To obtain the most recent version of the instruction.
IMPORTANT
• Do not expose the product to extreme temperatures.
• Always wipe with a clean, dry cloth.
• Ensure that the weight of the cable does not fall on the connector, as this may
cause damage to your equipment. If supported, attach the cable to this or the wall
to prevent damage
NOTE:
Make sure the transmitter points directly to the equipment you want to control
You need to connect the HDMI cable without using amplifiers, power cords or
HDMI accessories for optimum operation.
In case the distance you want to connect is greater than 20 meters use extensors
so that it can work properly.
SPECIFICATIONS
Carrier Frequency: Dual Band (30 kHz - 60 kHz)
Sensor receiving distance: up to 12 m
Maximum current: 15 mA
Place both modules in IR mode as shown in the image
OUT
IN
CEC IR
IR R
X
OUT
IN
CEC IR
IR R
X
Mode
VOL-
EQ
RP
T
U/SD
0
1
2
3
4
7
8
9
5
6
VOL+
S
C
N
Transmitter
TV
TV
Receiver
Remote control
of DVD
DVD
HDMI cable max 20 m
IR
T
X
OUT
IN
CEC IR
IR RX
