Before starting
Connection
Installation
• Take measures to know the length of strip
that you will need.
• Make the cut on the dotted line if it is
necessary.
Insert the connector in a regulated
eliminator
1. Select a smooth and flat surface to place the
strip. Make sure it is free of dust or waste.
2. Remove the protective film.
3. Paste the strip.
1. Remove the plastic layer
carefully.
4. Use a soldering iron and a
tin solder to fix cables.
5. Insulate the connection with
electrical tape, silicone or
thermofit.
3. Place two cables between the terminals.
Check the polarity.
2. Cut on the dotted line.
+12V
+12V
+12V
Join two strips
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
Avoid handling the strip while it is connected to energy
electric
You can join up to three strips. If you exceed this amount, overheating may occur
+12V
+12V
+12V
+12V
+12V
SIZE 2
Specifications
Important
Input: 12 V - - -
Consumption: 3.6 W per meter
Color: red
Protection IP: 65
Consumption: 18 W/h
Stand-by power consumption: not applicable
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site (www.steren.com) to obtain the latest version of
the instruction manual.
Read these manual to avoid any damage.
