Product: Wired and wireless microphone
Part number: MIC-280
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please give a call to our Call Center.
01 800 500 9000
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our web site (www.steren.com) to obtain the latest version of the
instruction manual.
•
Do not expose to extreme temperatures.
•
Do not use or store the equipment near wet places. May cause malfunction or shock hazard.
•
Avoid dropping the unit as this may cause damage.
•
Do not put heavy objects on the device or accessories.
•
Do not expose the device or accessories to dust, smoke or steam.
•
Do not use solvents or other chemicals to clean the exterior of the device.
•
Remove batteries if they are empty or if the player is not going to be used for a long time.
Unidirectional and professional, compatible with most audio amplifiers. It includes a receiver and a
6.3 mm cable to work as cordless or corded microphone, respectively.
Up to 20 m wireless range, being perfect to use it at small auditoriums, schools and karaoke.
1. Battery compartment.
2. Switch
• Wireless mode
On: microphone on
Off: microphone off
Mic: To mute the sound without turn the
microphone off.
• Wired mode
On: To mute the sound without turn the
microphone off.
Off: microphone off
Mic: microphone on
3. LED indicator
4. Grill:
Protects the microphone cartridge and
helps reduce “breathy” and wind noise pick-up.
5. 6.3mm Plug:
This plug is connected to an
amplifier.
6. Battery compartment.
7. Power LED indicator.
8. On/Off switch.
9. Cannon plug:
This plug is connected to the
input from microphone.
10. 6.3mm Plug:
This plug is connected to an
amplifier.
• Microphone
1. Open the compartment lid.
2. Place a battery (AA), pay attention to the
polarity.
Microphone:
Input: 1.5 V - - - (1x AA)
Frequency response: 100 Hz – 10 KHz
Impedance: 600 Ohms
Sensitivity: -72 dB+/-3 dB to 1 KHz
4. Place the switch to ON in order to mute the sound without turn the microphone off.
5. Turn off the microphone.
6. Remove the battery.
3. Turn on the microphone
4. Emmit a sound in the microphone.
Product design and specifications are subject to change without notice.
• Receiver
1. Open the battery compartment on the
receiver.
2. Insert a battery (AA) in the receiver
respecting polarity.
Receiver:
Input: 1.5 V - - - (1x AA)
• Wired
• Wireless
1. Use the cannon-6.3mm cable and connect the
6.3 mm plug to an amplifier, the opposite extreme
connect to the microphone.
2. Turn on the microphone.
3. Emmit a sound in the microphone.
1. Connect the wireless antenna in the
input from microphone.
2. Connect the receiver to an amplifier an turn on.
5. Place the switch to MIC in order to mute the sound without turn the microphone off.
6. Turn off the microphone.
7. Remove the battery.
MIC 2
MIC 1
Input
Selector
LN
10
07
05
02
00
00
10
00
00
10
07
05
02
10
07
05
02
PH
LN
PH
MONO
ST
Input
Selector
Output
Selector
Power
On
Mic Bal.
Mic 1
Mic 2
Mic Level
Talkover
On
Channel
Channel
2
HP
Channel 1
Channel 2
Channel USB
00
10
Mp3 PLAYER
+5dB
0dB
-5dB
10dB
-15dB
Output Meter
USB
MIC 2
MIC 1
Input
Selector
LN
10
07
05
02
00
00
10
00
00
10
07
05
02
10
07
05
02
PH
LN
PH
MONO
ST
Input
Selector
Output
Selector
Power
On
Mic Bal.
Mic 1
Mic 2
Mic Level
Talkover
On
Channel
Channel
2
HP
Channel 1
Channel 2
Channel USB
00
10
Mp3 PLAYER
+5dB
0dB
-5dB
10dB
-15dB
Output Meter
USB
