WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
Part number: LAM-830
Brand: Steren
Before using your new Steren’s product, please read this instruction
manual to prevent any damage.
I M P O R T A N T
Please check our website (www.steren.com) to obtain the latest
version of the instruction manual.
I N S T R U C T I O N S
S P E C I F I C A T I O N S
Input: 100- 220 V~ 60 Hz 35 W
Power output: 30 Watts
Equivalent light power output: 1 200 W
Beam angle: 120°
Light temperature: 2 500 K-7 000 K
Life time: 50 000 hours
*IP65: Protection against dust and water. Perfect for outdoor uses
.
Consumption: 30 W/h
Stand-by power consumption: Not Applicable
Installation on wall
1. Select the place where you want to install. (It is recommended to install it on a wall or
ust the inclination angle.
ns.
3. Drill the surface and insert the necessary anchors.
5. Loosen the screws of the support using a wrench and adjust the inclination. Then,
tighten the screws again.
Line: Black
Earth: Green
Neutral: White
a) Connect directly to the outlet
Switch not included
b) Connect with power cord
and unite with its plug. The union should
If you use a power cord with plug should have the third pin to
connection to ground.
Avoid installing if you has wet hands or if the surface where
you are it is wet.
2. Cut the power supply.
3. Use a 18 AWG (0.84 mm) cable to connect
Coming up next, is show two possible options:
LINE
GROUND
NEUTRAL
• Before made the connection, cut the electricity.
• Don’t use with dimmer.
• Use the ground connection of the equipament.
• Avoid dropping the unit as this may cause damages.
• This device cannot be used by people
with different abilities, unless they have
preparation and supervision.
• This product is NOT a toy; keep it away
from children.
V3.0
0916A
GROUND
LINE
NEUTRAL
C
M
Y
CM
MY
CY
CMY
K
LAM-830-V3.0-instr.pdf 2 09/09/16 9:54 a.m.