LAM-745
10W portable LED lamp with
USB charger
V0.2 / 0617v
IMPORTANT
USER MANUAL
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one yearand three
months in the battery from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice, product box or package, and product, must be presented when warranty service is
required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
01 800 500 9000
Product: 10W portable LED lamp with USB charger
Part number: LAM-745
Brand: Steren
RETAILER INFORMATION
Name of the retailer _______________________________________________
Address ________________________________________________________
Product _________________________________________________________
Brand __________________________________________________________
Before to use the product, please read carefully this manual to avoid any malfunction. The info in
this manual is shown as reference. Due to updates can exist differences. Consult our website
www.steren.com to obtain the current version of this manual.
While charging, the LED indicator turns in red. After
fully charge turns in green.
• Don't aim directly to the eyes.
• Don’t use or store the device in places where exist water or splashes.
• Do not drop the lamp, won't pull strongly, may you cause permanent damages in your unity.
• Do not use the lamp if has been wet to avoid electrical hazard, explosions or damages in the
unit or in yourself.
• Disconnect the charger before to clean it.
• The lithium ion battery should be recycled, don't expose the battery to the fire or to high heat,
may explode.
• Use the charger only in a standard power supply.
• Don't try to remove the device, may cause damage.
• Do not charge the unit for more of 12 hours.
Before charging battery, make sure the LED lamp is off. The required time to charge the battery is 8
hours approx. For both options.
CAUTIONS
PARTS
HOW TO CHARGE THE BATTERY
PLACING
HOW TO USE
Option 1
Option 2
SPECIFICATIONS
Input: 5 V - - - 500 mA
Output: 5 V - - - 1 A
Consumption: 3 W/h
Stand-by power consumption: not applicable
Backup battery: 3.7 V - - - 2 400 mAh
Luminosity: 630 lumen (maximum intensity)
Protection: IP X4 (dust and light rain)
AC / DC converter
Input: 110-240 V~ 50/60 Hz 500 mA
Output: 5V - - - 500 mA
LED lamp
Holder
Head
Intermitent back light
On / Off Switch
USB power port
(for another devices)
Micro USB
charging port
Hooks
Magnets
UBS to micro
USB cable
Car charger
Wall charger
Press once =
High intensity
Press thrice =
Intermittent back light
Press twice =
Low intensity
Press x4 times =
Off
DC/DC converter
Input: 12 V - - -
Output: 5V - - - 500 mA
Using as lantern
Over a metallic
surface
Using the hooks
For indoor and outdoor use