Steren K-385, Инструкция по эксплуатации

Страница: 20 / 24

9
7. Mount transformer on the box base using screws and nuts
supplied, tighten just enough.
8. Mount PCB on the box base with tittle screws supplied, tighten
just enough.
9. Insert portaleds in he holes for LEDs on the box cover.
10. Pass electrodes wires through holes.
11. Insert LEDs on portaleds up to you hear a “click”.
12. Mount POT on the cover box with its nut and washer, ensure it
is in OFF position and install the knob.
13. Mount electrodes wires inside the handles through plastic caps,
make inside a knot in order to use it as a stopper, peel wire end and
ensure electric contact inside the handle.
Do not short circuit handles because your batteries will be lacked.
Regularly clean POT with Steren´s cleaner LIM-E+.
WARNING:
14. Ensure POT in OFF position and install batteries.
15. Install cover box and fix it with long screws.
16. Your Shock box is ready to use, enjoy it.
STOPPER
TUBE
PEEL EXTREME
CABLE
KNOT