Steren COM-529, Инструкция по эксплуатации

Страница: 18 / 22

6
Operation
1. Turn the computer on.
2. Connect the USB cable to an available USB
port.
3. The computer will detect the new hardware.
XP will install the required files. It is possible
that in other systems the Found new hardware
wizard will appear, just follow the instructions.
Required drivers are part of Windows.
4. After a few seconds, the mouse will be ready
to use.
5. To set the parameters of the mouse, open
Control Panel >> Mouse and change them
according your necessities.