ANSWERING AN INCOMING CALL
In order to answer a call, wait for the call tone on your Bluetooth hands-free speaker, then press the
multifunction button once and begin speaking.
In order to finish this call, press the multifunction button once again and you will hear a short tone.
REJECTING AN INCOMING CALL
When you hear the call tone, press and hold the multifunction button for three seconds until you hear a
short tone. A “line busy” message will be sent (this may vary depending on the cellular phone model and
the service provider).
VOICE DIALING
If your cellular phone has voice dialing capabilities, press the multifunction button and you will hear a tone.
After this tone speak your programmed command for dialing
For more information on voice dialing, consult your cellular phones instruction manual.
REDIALING
If you wish to redial the last number dialed, press the multifunction button two times continuously.
ADJUSTING THE VOLUME
During your phone conversation, press the button in order to increase the volume level or the
volume – button in order to decrease the volume level according to your needs.
MUTE MODE
In order to use to use your Bluetooth hands-free speaker in mute mode, press the MODE button for three
seconds. The LED indicator light will blink red. In order to cancel mute mode, press the MUTE button for
three seconds.
SPECIFICATIONS
Bluetooth Specifications: Class 2 Version 1.2 Rechargeable Li-Ion Battery: 3.7V ---, 650mAH
Operating Frequency:2.402 to 2.480 GHz AC/DC Charger : 5V --- to 6V ---, 400mA
Power Adaptor Input: 12-24V --- 4W Power Adaptor Output: 5V --- 400mA Weight: 2.8 oz.
Product design and specifications are subject to change without previous notice.
ENGLISH
ENGLISH-05