Product: Electric dust remover
Part number: AIR-1000
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product is in the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please contact our Call Center.
01 800 500 9000
Product design and specifications are subject to change without notice.
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
C A U T I O N S
S P E C I F I C A T I O N S
I M P O R T A N T
Input:
120 V~ 60 Hz 4 A
Air flow:
70 CFM
Motor capacity:
3/4 HP
Consumption:
4.8 kWh/day (10 hr)
Stand-by power consumption:
Not applicable
The instructions for this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
H I G H L I G H T S
I N S T R U C T I O N S
The electric dust remover is the equivalent of the chemical air duster.
Use it limitless to clean all your devices. Its internal turbine generates air flow similar or even
stronger than any normal air duster.
1. INSTALL TIPS
Attach the desired tip onto the blower port by pressing the push button.
• Large round tip and air flare:
Electric dust remover
One extender
Two circular tips
One graver style mini tip
1 brush
Air flare
For wide area coverage.
B) Brush: use to remove dust effectively.
C) Mini tip: to clean the smallest areas.
- Change the tips to make the cleaning process easier.
- Do not operate without the tips.
• Circular tip (narrow)
- Micro-cleaning tool kit:
A) Extender: is perfect for hard-to-reach areas.
Make sure to correctly set the push button
with the tip´s hole.
For concentrated power and to use the micro
cleaning tool kit.
•
Do not use this product to disperse liquid solvents or fuels.
•
Check connections between AIR-1000 and the tool kit every time you use it.
• Do not try to open the device, may cause damages and warranty will be void.
•
Be careful when using this product, you may blow dirt particles into the workshop.
•
Make sure you direct the air exhaust of air tools away from yourself and others working in the area.
•
Do not point the electric dust remover at other people.
•
Always wear eye protection when using air tools.
•
Keep product out of the reach of children.
• Do not use or store the equipment near wet places. May cause malfunction or shock hazard.
• If the power cord is damaged, it must be replaced by your service agent or qualified personnel to
avoid risks
Check foam filter for dust build up, it can be washed.
Do not
obstruct the
airflow
Use the AIR-1000 in periods
of 5 minutes (max) and turn off
for 2 minutes to normalize the
temperature of the turbine.
The heating of the turbine is
normal.
2. HOW TO USE
Plug the power cord into a standard outlet.
Hold the AIR-1000 firmly and aim the tip between 15 and 20 cm from the surface to be cleaned.
Press the on / off button and start the movement of the gun.