14
Setup Main Menu
The Setup Menu comprises sub-menus some of which are optional depending on antenna
type. Scroll through list of menu items with
K1
or
K2 knobs
. The list does not loop. The
items will change rapidly so turn knob slowly.
There are 2 soft keys,
Select
and
Exit
.
Select
will enter a sub-menu and
Exit
will exit
sub-menu or setup menu if no sub-menu is selected.
RETRACT
will also exit setup
menu. Pressing
K2 knob
is same as pressing
Select
.
Press
Setup
once to enter setup mode. Even though soft key for setup is not present
when in setup menu, button is still active. Pressing setup button while in setup menu will
exit current menu. To select setup options. Use
K1 knob
to find desired sub menu and
press
K1 knob
.
The selections available are 1) Options Menu, 2) Calibrate Antenna, 3) Retract Elements,
4) Autotrack Settings, 5) Band Limit Settings, 6) Transceiver Setup, 7) Motors Test, 8)
Relays Test, 9) Software Version, 10) Antenna Selection, 11) Reset User Data, 12) Fault
Code Menu, 13) Create/Modify, 14) LCD Display Setup, 15) Flash File Menu.
Options Menu
The
K1 knob
will cycle through possible options.
The
K2 knob
is used to change option
value.
Select
is used to confirm change to option. When pressing
Select
button, entire
display will briefly flash on and off to verify change has been accepted.
Change is
immediate when
Select
is pressed.
Global offset does not change element lengths until
Select
is pressed.
SETUP Menu
K1 for next item
Options Menu
