SVW900 Wifi SIP Phone User Guide
www.stephen-tele.com
A: Search Available WLAN
1 At standby mode, press the right soft key or OK key to enter the main menu.
2 Select
4 setting> 2 WLAN setting > 2 WLAN search
, press right soft key or OK key to
start WLAN searching.
3 After searching, there will be a list to show you the available AP, with security type and
signal strength. Select the one with highest strength (if this AP is permitted to use),
press right soft key or OK key to setting.
Note: The security type of the selected AP was shown at the searched AP list. We take the
type of WEP-OPEN for example here, you can set other types by following the
indication.
B: Connect WLAN
1 Set the
SSID
name first, (the default name is the one you have just selected the name
is consistent to AP currently), press right soft key or OK key to enter
change
menu.
2 Select
2 security type>2 WEP-OPEN 1 WEP Key index 1 WEP Key 1,
press right soft
key or OK key and enter the
WEP-OPEN
menu again. If the security type is “Open”, go
to Step 4 directly.
3 Select
2 key / pass 1 passphrase/2 hex Key,
press right soft key or OK key enter the
enter key hex
mode, key of the SSID is the one of the AP you have just selected.,
then press the right soft key or OK key enter
change
menu again.
or
4 Select
3 IP setting> 1 use DHCP
(If the WLAN you selected support DHCP server),
press right soft key or OK key to enter
change
menu again.
You can also select
static IP
, follow the indications, enter the IP address net mask
gateway DNS address in turn. And back to
change
menu after setting.
5 Select
4 save and use
, press right soft key or OK key to enter the
save and use
menu.
6 Select
1 do not use
, press right soft key or OK key enter
WLAN Setting
menu again,
finish WLAN setting.
C: SIP Server Register
