STEPHEN TECHNOLOGIES CO.,LIMITED
SVP307 SIP Phone User Manual
1
1
# $ % ^ & * ( ) _
+ | ” < > ? - = ; ’ / [ ]
{ } `¥ 1
2
a b c A B C 2
3
d e f D E F 3
4
g h i G H I 4
5
j k l J K L 5
6
m n o M N O 6
7
p q r s P Q R S 7
8
t u v T U V 8
9
w x y z W X Y Z 9
Key Characters
0
. , @ 0
*
. :
! NOTE:
1. Press “ALPHA” key to change input mode between digits and alphanumeric. Default:
alphanumeric
2. The ‘*’ key can be used to input ’.’
3. If you need to enter the same character consecutively, press the pound key (#) to confirm
the last entry, and then press the number key again to enter the next character.
For example, if you are entering “Cab”:
• Press the 2 key 7 times
• Press the 2 key twice
• Press the 2 key 3 times
4.1.2 Network settings
First, you should set network type according to your actual network status. DHCP is default status
.
In DHCP status, your LAN automatically assigns all the required network parameters to the phone.
Press the SET/OK key,Use “”key to select
Network_Type
. Press” SET/OK”, and then use”” to
select DHCP, Static IP or PPPoE. Press ESC twice, you will see the system activate the settings
automatically.
•
Static IP Settings
If your network is Static IP, then you should set static IP address. Press“ SET/OK” key, use“” to
select Static IP Settings. Press“SET/OK”, then set IP, gateway and subnet mask. After set
complete,press “ESC” key to save automatically.
•
PPPoE Settings
If your network is PPPoE, you should make PPPoE settings. Press“ SET/OK”key, use “” to select
PPPoE. Press “SET/OK”key, then enter the PPPoE user name and password. After set
complete,press “ESC” key to save automatically.
