www.stephen-tele.com
Show http access setting ---http-port
Set telnet access port ---telnet-port xxx
Show telnet access port ---telnet-port
Set RTP initial port and quantity
---media-port –startport xxx –number xxxx
Example:
<config-netservice>#media-port –startport 10000 –number 200
Add route rule ---route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
Example:
Arcihfone<config-netservice>#route –gateway 202.112.10.1 –addr 202.112.210.1
–mask 255.255.255.0
Delete route rule ---no route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
Show route info ---route
Show netservice info ---show
Dial-peer settings
path:
<config-pbook>#
[disable]enable calling through GK and proxy ---[no]enableGKandProxy
Add number-IP bond entry ---entry –number xxx –ip x.x.x.x –protocol xxx
Example:
<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip
Add number-IP bond and add prefix to the dial number
---entry –number xxx –ip x.x.x.x –protocol xxx _add xxx
Example:
<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _add 123(dial
100 and will send 123100 according this rule)
Add number-IP bond and replace the destination with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _all xxx
Example:
<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _all 123( user
dial 100 and gateway will sent 100 instead)
Add number-IP bond and delete the prefix of the destination number
---entry –number xxx –ip x.x.x.x –protocol xxx _del xxx
Example:
<config-pbook>#entry –number 1234 –ip 202.112.20.100 –protocol sip _del 2 (dial
1234 will send 34 instead)
Add number-IP bond and replace the prefix with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _rep xxx _length xxx
Example:
<config-pbook>#entry –number 1234 –ip 202.112.20.100 –protocol sip _rep 567
_length 2(dial 1234 will send 56734)
Delete dial-peer entry ---no entry –number xxx
Show current dial-peer rules ---show
Set default voip protocol ---default-protocol xxx
Port settings
path:
<config-port># <config-port X>#
set accecp relay mode ---accept-relay xxx
set callerid mode ---callerid xxx
disable callerid
---no callerid
config call forward ---callforward –conditon xxx –number xxx –ip xxx –port xxx –protocol
xxx
Example:
<config-port 0>#callforward –condition busy –number 100 –ip 202.112.10.100 -port
5060 –protocol sip