24
INSTALL TUBE
IMPORTANT! DO NOT LUBRICATE PUMP TUBE OR ROLLER ASSEMBLY.
1.
Ensure the power to the pump is off and the power cord is unplugged. On the
adjustable model, ensure that the feed rate control is set to 10.
Figure H
2.
Place the new tube in the pump head; use your fingers to center it over the rollers.
Figure I
3.
Place the tube housing cover on the tube housing, affix the front latches to the
cover lip and then press the latches back to secure.
Figure J
Identify the cause of tube failure prior to installing a new tube.
A used tube will have stretched approximately 3/4" and the new tube will
appear to be stiff and short. Follow directions to allow rollers to stretch tube
into place.
PUMP TUBE
TUBE REPLACEMENT
continued
www.stenner.com
H
I
J
