T61827
Revision:
14
MAESTRO
MAINTENANCE
Spindles and nuts:
Due to the fine and precise tolerances of spindles and nuts, these must be carefully
maintained. They must be kept absolutely clean and should always be well lubricated (cp. lubrication
instructions below). If these instructions are ignored, there is a risk that the spindles will be damaged.
Due to the construction of the safety system they do not require maintenance, however, we recommend
that the movable parts on the top of the posts are greased once every 6 months.
V-belts:
These must be re-adjusted once a year to correct tension: when pressing hard on the middle of
the belt these must only be pressed 5 mm down.
Expansion bolts:
These must be re-tightened once a year with a torque of :
Model: Torque:
Maestro 2.20
60Nm
Maestro 2.25
60Nm
Maestro 2.30
60Nm
Maestro 2.32
60Nm
Maestro 2.37
125Nm
Re-tightening of screws at post base:
These must be re-tightened every 12 months with a torque of :
Model: Torque:
Maestro 2.20
100Nm
Maestro 2.25
100Nm
Maestro 2.30
100Nm
Maestro 2.32
100Nm
Maestro 2.37
100Nm
If one or more of the screws break during the re-tightening all screws at the post base must be replaced.
Note ! If the lift is installed as wash version or placed in a humid environment the screws must be re-tightened
every 6 months.
Lubrication:
Lubricate the lift every 6 months as follows:
WHERE
WHAT
HOW
RECOMMENDED
PRODUCTS
1.
Roller pipes/guides
Remove steel bands
from front edges of
posts
Lithium grease:
Lithium soap grease with high
pressure additives, consistence NLGI
2 (apply with brush)
1. Castrol APS 2*
2. Shell Retinax EP 2
- Q8 Rembrandt Moly
2.
Spindles/nuts
Remove steel bands
from front egdes of
posts
Molybdenum disulphide grease:
lithium based lubricating grease with
min. 3% molybdenum disulphide
(Mo
2
S).
(apply with brush)
3. Castrol MS3 Grease*
4. Shell Retinax HDX2
- Q8 Rembrandt Moly
3.
Top bearing housing Remove top cover
Lithium grease
- see item 1
4.
Arm suspension
Lithium grease
- see item 1
5.
Arm locks
Lubricating oil
*) Lubricated/greased from manufacturer with these products
Содержание Maestro 2.20
Страница 5: ...T61827 Revision 4 MAESTRO Sikringer se el diagram ...
Страница 14: ...T61827 Revision 13 MAESTRO Fuses See wiring diagram ...
Страница 33: ...T61827 Revision 32 MAESTRO ...