INSCW7501108
750 W density per linear
foot
600 W density per linear
foot
450 W density per linear
foot
Volts
mm
in.
kg
lb
---
1500 W
CW750612x
1200 W
CW750609x
900 W
x
600
23 5/8
12,7
28
---
2250 W
CW750918x
1800 W
CW750913x
1350 W
x
900
35 7/16
17,7
39
---
3000 W
CW7501224x
2400 W
CW7501218x
1800 W
x
1200
47 1/4
24,1
53
CW7501537x
3750 W
CW7501530x
3000 W
CW7501522x
2250 W
x
1500
59 1/16
29,1
64
CW7501845x
4500 W
CW7501836x
3600 W
CW7501827x
2700 W
x
1800
70 7/8
33,6
74
CW7502152x
5250 W
CW7502142x
4200 W
CW7502131x
3150 W
x
2100
82 11/16
38,6
85
CW7502460x
6000 W
CW7502448x
4800 W
CW7502436x
3600 W
x
2400
94 1/2
43,5
96
Add
W
for white or
A
for almond.
x = 2 (240 V)
3 (347 V)
5 (480 V)
6 (600 V)
7 (277 V)
8 (208 V)
For a complete model list, consult our online product catalog at stelpro.com
MAINTENANCE
SELECTION TABLE
TECHNICAL DRAWINGS
INSTALLATION
Cut off power supply at breaker/fuse before proceeding with installation.
N.B.
This product must be connected by a certified electrician, according to the electrical and building codes effective in your
region.
This unit can be recessed or surface-mounted. In both cases, the bottom of the heater must be installed at no less than 3 in. (7.6 cm) above the floor.
•
For recessed installation (800 W/ft max), keep a minimum clearance of 0.25 in. (0.6 cm) at the top of the heater.
•
Do not install baseboard below an electrical outlet.
•
To install accessories (e.g.: thermostat), consult the related guides.
•
N.B. In order for the warranty to be valid, the unit must be cleaned regularly.
Cut off power supply at circuit breaker/fuse before cleaning this heater. Use a soft rag for dusting. When cleaning, use only a damp rag and
non-abrasive dish soap. Do not use abrasive or chemical cleaners because they may damage the finishing. If the unit is used in a very dusty
location, use a vacuum brush to remove dust and other foreign objects from the grilles. Note that cigarette smoke could yellow the discharge
grille and that the best way to prevent it is to clean the unit on a regular basis.
Do not use cleaning products identified with these symbols:
N.B. Note that there is electrical current to the unit even if the thermostat is set off. Meaning that there is a risk of
electric shock as long as the unit is energized.
1 1/8"
[29 mm]
2 1/2"
[63 mm]
5 1/2"
[140 mm]
10"
[254 mm]
3 1/2"
[90 mm]
KOE Ø
7/8"
[22 mm]
KOE Ø
3/8"
[10 mm]
2 1/8"
[55 mm]
2 5/8"
[67 mm]
5 1/4"
[133 mm]
14"
[356 mm]
2 1/2"
[63 mm]
6 3/8"
[162 mm]
2"
[51 mm]
9 1/4"
[234 mm]
1 1/2"
[38 mm]
KOE Ø
1 1/8"
[29 mm]
KOE Ø
TOP
FRONT
SIDE
