email: [email protected]
2
CL-XYD-L Motion-sensor night light
User manual
Safety notices
Electrical work safety advice and tips
●
Make sure the input voltage is correct.
●
Avoid short-circuiting the unit, as it will burn the power supply or cause fire.
●
Avoid placing the light in the rain, outdoors or in moist areas as it may damage or short-circuit the
device.
●
Do not place the product into fire, open flame or hot surface as it may cause combustion or explosion.
●
Do not open the LED light for inspection or re-wire the electronic circuits if you are not a professional.
Opening the light engine might void your warranty.
●
Avoid using the device under -10
°
C and above 40
°
C temperature.
DIY tips and safety advice
●
This task will involve working at height. A safe system of work should be established and maintained, in
order to prevent injury.
●
Consider your safety! Think about the potential risks and dangers of the work and the steps you should
take to avoid them.
●
Personal protective equipment. Make sure that you are equipped with suitable and sufficient personal
protective equipment. This could include eye protection, face mask, protective overalls, safety footwear
and gloves.
●
Ensure that the work area is sufficiently illuminated.
●
Check that the tools you will be working with are in a good operating condition. For the installation,
you will need a cordless drill with drill bits or a screwdriver.