System Controls / Connections / Operation
Media Player
Media Player
The media player will accept MP3 and WMA audio files whether in the root directory or subfolders of
standard flash memory. Any incompatible or non music files located in the drive will be ignored. Program
material from this player is controlled by the TAPE/MP3 level adjustment on the MAIN MIX / EFFECT
section of the control console.
•
USB Input Port – accepts standard thumb drives.
•
SD/MMC – accepts standard SD or MMC flash memory
•
►
– toggles the player between PLAY and PAUSE modes
•
REPEAT – toggles the player between REPEAT ONE, REPEAT ALL and REPEAT NONE modes
•
EQ – toggles the player between several preprogrammed EQ settings, including:
Rock
Pop
Classic
Jazz
Blues
Hall
Bass
Soft
Country
Opera
Normal
(flat)
•
◄◄
– reverts back to the beginning of the track being played, then to previous tracks
•
►►
– advances to the next track in the sequence. If last track is reached, it will revert back to
first track
•
ON / OFF Turns output from the MEDIA PLAYER off, preventing sound to be added to the main
mix
Control Console
The main mix console features controls for each of he four mic/line
input channels. These channels are labeled CH1, CH2, CH3 and CH4
and correspond to similarly labeled connections on the lower section.
GAIN
– adjusts the sensitivity of the input channel. This allows
compensation for devices such as tape decks, CD players,
microphones and instruments that may have differing output levels.
HIGH
– provides high frequency compensation (treble) for that
specific channel.
MID
– provides mid frequency compensation (midrange) for that
specific channel.
LOW
– provides low frequency compensation (bass) for that specific
channel.
EFF
– controls amount of effect that the EFFECT section of the
CONTROL CONSOLE has on this specific channel
PAN
– adjusts the amount of balance this input channel has between
two output channels. Center position privides equal signal to both left
and right output channel
VOL
– controls amount of level this channel relative to other input
channels
MAIN MIX –
this section provides overall output level adjustments for all combined input channels and
media player. It acts as the master volume (VOL), bass (LOW), midrange (MID) and treble (HIGH)
control.
EFFECT
– provides echo/reverb effect to each of the input channels CH1 ~ CH4.
TIME
adjusts the delay
between each reverberation,
DEPTH
adjusts the actual number of reverberations,
EFF VOL
adjusts the
relative level of the effect, as compared to the normal level of the input signal. Note, t his section does not
effect the audio from the media player.
AMP CLIP –
this LED indicator will illuminate when the amplfieir reaches its maximum output. It is critical
that this not light more than very intermittently, to prevent speaker damage
POWER
– this LED indicator will illuminate when master power is switched ON.
