Page <3>
V1.0
14/04/21
Installation
1. Cut the Speaker Hole
Use a stud finder to locate an area that is free of obstructions or studs. Position the cutout template where you are installing
the speaker. Trace the template to mark out the speaker location with a pencil. Drill a pilot hole and cut all of the way around
the circular outline with a cutting saw.
2. Wire the Speaker
Pull the speaker wire out of the hole which you have cut and connect it to the speaker as shown.
3. Install the Speaker
Place the speaker into the ceiling and tighten all the clamp screws with a Philips screwdriver.
4. Attach the Grill
As several magnets are on the speaker frame, attach the grill to the rim of the speaker directly. Ensure the grill is attached to
the speaker securely to keep the grill from falling.
Connection
Ensure that the speaker is unplugged from the mains before making any connections.
Stereo Connection of L/R Pair Speaker
Connect the input terminals of the speakers to the speaker output terminals of the amplifier. Always check to ensure polarity
is correct:
L(left) to L, R(right) to R, “+” to “+”, and “-” to “-”.
