C. PROGRAM MENU
•
Press
MODE
to choose the desired operating mode. Repeatedly pressing the MODE button will scroll through
the various modes: DMX Channel, Slave, Sound Activated, Static Color, Preprogrammed, and Automatic
•
Once in a desired mode, press
SETUP
to make changes, using the
UP
or
DOWN
buttons
Built-in Program Mode
•
Press the
MODE
button multiple times until Prxx is displayed (default is Pr01)
•
There are seven available programs, each with a unique sequence of color changes and fades. Without pressing
the
SETUP
key, press
UP
or
DOWN
keys to choose Pr01 through Pr07
•
If any program is selected, other than PR01, you can control the speed of those changes. While the program is
running, press the
SETUP
key, the display will show SPxx. Using the
UP
or
DOWN
keys, you can choose any
numerical value from 00 to 99 to adjust the speed (99 is fastest).
•
Pr01 is the static color mode. If Pr01 is selected, you have ten colors to choose from. When in Pr01 mode, press
the
SETUP
one time, then press the
UP
or
DOWN
keys to scroll through the ten preset colors. At this time, a
single color will be displayed, steady on.
•
From this point, to strobe these colors, press the
SETUP
key, the display will read F500. Using the
UP
and
DOWN
keys, you can set the unit to strobe. F500 is full on, F501 is slowest rate, F599 is fastest
Auto Run Mode
•
Press
MODE
button multiple times until the display shows AUTO. In this mode, the unit automatically
sequences through its seven available programs described above.
•
While in the Auto Running Mode, you can adjust the speed in which the programs change, as well as set a
strobe rate, if desired. This is accomplished in exactly the same manner as described in the Built-in
Program Mode.
Static Color Mode
•
Press the MODE button multiple times until COLr appears.
•
Press the SETUP button multiple times, you will scroll through the following options:
o
Rxxx – Red color adjustment
o
Gxxx – Green color adjustment
o
bxxx – Blue color adjustment
o
F5.00 – Strobe rate adjustment
•
The “xxx” as stated above represents the relative brightness of each color. 000 is off, 255 is the highest
brightness. You can individually adjust the colors of all three RED, GREEN, BLUE emitters to achieve a nearly
infinite number of blends for virtually any color
•
F5.00 allows you to set the light to strobe. Strobe values range from F5.00 to F5.99 (99 being fastest)
Sound-Activated Mode
•
Repeatedly press the MODE button until the display shows SUxx. The display range is SU01~SU31. This is the
sound activated mode, the SUxx number represents the sensitivity, with 31 being the most sensitive
•
Press the
UP
or
DOWN
buttons to adjust the sensitivity
