INSTALLATION
Connect the power lead from the supplied power supply into the power input found on the rear of the ceiling speaker
(noted on diagram). While installing the power, do not overstretch, kink, or pinch the wire.
When installing the passive speaker, run speaker wire from the output on the active speaker to the input on the
passive speaker.
NOTE:
When choosing speaker placement, please note that on the rear of the active speaker,
There is a switch that allows the user to select stereo of mono operation. If stereo is chosen,
the active speaker will be left, and the passive speaker will be right. If mono is chosen, the
both speakers will play a combined left and right signal.
