UV resistant ABS resin composite enclosure
Wedge shape design for improved cabinet performance and easy corner mounting
Included mounting brackets and hardware
Rustproof aluminum grill
Heavy duty five–way binding post connections
Specifications
Model
50-14930
(white)
50-14931
(black)
50-14935
(white)
50-14936
(black)
50-14940
(white)
50-14941
(black)
Woofer size
5"
6-1/2"
8"
Tweeter size
1"
1"
1"
Power capacity (RMS / peak)
30W/60W
50W/100W
80W/160W
Frequency Response
60Hz ~ 18KHz
55Hz ~ 20KHz
45Hz ~ 20KHz
Sensitivity (SPL W/M)
89dB
89dB
90dB
Nominal impedance
8Ω
8Ω
8Ω
70V Transformer taps
1.9W, 3.75W, 7.5W,
15W
2.5W, 5W, 10W, 20W
3.75W, 7.5W, 15W,
30W
Dimensions HWD (per speaker)
9.5" x 7" x 5.7"
11.2" x 8.1" x 7.1"
14.2" x 10.6" x 9.5"
Weight (pair)
11.9 lbs
18.7 lbs
29.8 lbs
Installation
While the included mounting bracket facilitates wall or ceiling mounting, these speakers are completely suitable for bookshelf use as well.
As these speakers do have considerable weight, care should be taken when deciding on placement. In bookshelf applications, consideration
should be given to everything from small children, pets and even ground tremors. When wall mounting, it is highly recommended that the
included bracket is anchored to a wall stud or similar interior reinforcement. In cases where specific location does not allow anchoring to a
wall stud, suitable anchors must be utilized. MCM Electronics stocks a wide variety of drywall, ceiling and concrete anchors. These anchors
are also commonly available at most hardware stores and home centers.
It is the sole responsibility of the end user or installation professional to ensure that proper anchoring and mounting techniques are used.
Improper mounting may result in a hazardous situation and violate local codes.
Connection
Located on the rear of the speaker system is a pair of color coded five-way binding post connections. These connections will accept spade
lugs, bare wire up to 14AWG, or banana plugs. When using spade lugs or bare wire, simply rotate the red (+) and black (–) plastic
terminals counterclockwise, insert the wire and turn clockwise to tighten. When using banana plugs, rotate the plastic terminals fully
clockwise, and insert the banana plugs into the terminal.
INSERT TABLE OF EACH 70V TRANSFORMER
8Ω Speaker Applications
With the rotary switch in this position, the speaker acts as a typical high fidelity speaker system, compatible with conventional home
theater receivers, sound equipment and stereo amplifiers. For use with these types of amplifiers and receivers, the rotary switch should be
placed in the 8Ω position. Placing the selector in one of the 70V positions will not cause damage to any connected equipment or the
speakers, however, the volume output will be greatly reduced.
70V Speaker Applications
The advantage of 70V systems is that it is much easier to connect multiple speakers to a single amplifier output. When used with this type
of amplifier, a very large number of these speakers may be connected. Additionally, speakers may be daisy chained, from one to the next,
greatly easing installation. When connecting speakers to an amplifier in this manner, you select a wattage tap on each speaker, and add
the total number of the taps of all speakers together. Then select an amplifier with wattage output that is at least as high as the total of
the wattage taps. For questions regarding 8Ω and 70V speaker installations, consult your MCM Electronics technical support department.
Warranty
MCM Electronics warrants to the original purchaser that these speakers will be free from defects in materials and workmanship for a period
of one year. In the event that warranty replacement is required, the unit will be replaced or repaired at the sole discretion of MCM
Electronics. Warranty claims must be processed through the MCM Electronics customer service department.
This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, or improper installation. This
warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the
purchaser’s sole remedy shall be repair or replacement as provided above. In no event will MCM Electronics be liable for any incidental or
consequential damages arising from the use of this product.
Stellar Labs
© 2015 MCM Electronics
www.mcmelectronics.com
