Steljes Audio Calliope, Руководство пользователя

Страница: 5 / 20

steljes audio . calliope user guide 5
POwER SOURCES
• this audio system is designed to operate
on 230 volts 50Hz, ac current. the main
plug is used as the disconnect device
and should remain readily accessible. to
prevent electric shock, do not use the
soundbar’s mains cable with an extension
cord, receptacle, or other outlet unless
the blades and ground terminal can be
fully inserted to prevent blade exposure.
never connect the audio system to 60 Hz
dc, or anything other than the specified
voltage.
DISPOSAL
• in the eu, electronic devices cannot
be disposed of with regular household
waste. please use the return or collections
systems of the retailer from whom you
purchased the soundbar. please dispose
of batteries in an environmentally friendly
manner. do not dispose of batteries with
regular household waste. please use
the return or collections systems of the
retailer from whom you purchased the
soundbar.
CAUTION
• never remove the back covers of the
soundbar as this can expose you to very
high voltages and other hazards. if the
system does not operate properly, unplug
the audio system and call your authorised
dealer or service centre for advice. adjust
only those controls that are covered in
the instructions.
wARNING
• to reduce the risk of fire or electric shock,
do not expose this soundbar to rain or
moisture.
• the system should not be exposed to
dripping or splashing and objects filled
with liquids, such as vases, should not be
placed on the system.
• this soundbar should only be connected
to a mains socket outlet with a protective
earthing connection.
ELECTRICAL INfORMATION
• this system is fitted with a bs1363/a
13 amp plug. if it is not suitable for your
supply sockets it must be removed and
replaced with an appropriate plug. if the
plug becomes damaged and/or needs
to be replaced please follow the wiring
instructions below. the plug removed
must be disposed of immediately. it must
not be plugged into a supply socket as
this will be an electrical hazard. if the
fuse needs to be replaced it must be of
the same rating and asta approved to
bs1362. if the plug is changed, a fuse of
the appropriate rating must be fitted in
the plug, adapter or at the distribution
board. if the fuse in a moulded plug is
replaced, the fuse cover must be refitted
before the appliance can be used.
wIRING INSTRUCTIONS
• follow the appropriate wiring instructions
given below. in both cases ensure that
the outer sheath of the cable is firmly held
by the cable clamp.
Steljes Calliope Product Manual EM.indd 5 25/01/2016 11:50