Using the Display Counter
Display Counter:
Battery Installation: Prior to first time use of the product you have to install the AAA 1.5V
battery. Then, you can choose the various functions of the computer to monitor your
progress of workout.
Display Monitor Battery INSTALLATION
Step 1
. Lift out display monitor from frame tube
Step 2
. Install Battery
Step 3.
Press the red MODE button to check if the unit is
working.
Step 4.
Place monitor back into frame tube.
Display functions:
•
Press red
MODE
button to select each function.
•
Hold on the red MODE button for 3 seconds to reset all
functions to zero.
SCAN:
Automatically scans each function in sequence.
TIME:
Counts from 00:00 up to 99:59 in one-second increments.
CAL:
Accumulates the calorie consumption during your exercise. This is a only rough guide
and should only be used as a comparison figure over several exercise sessions. 0 to 999
COUNT:
Accumulates the numbers of strides during a work-out session. 0 to 9999
STRIDES/MIN:
Displays strides per minute.
Please Note:
1. To turn on the power, just press the red MODE button or start exercising.
2. With no signal transmitted to the display for 4 minutes, the computer will shut off the
LCD-display automatically.
