Steiss UTS, Руководство пользователя

Страница: 5 / 24

4. Quick Start Guide
55
Arrival of Product
BOX 1:
Air-Alternating mattress, pump and manual
Preparation of Area
1. Place the Steiss™ Universal Therapy System (UTS) directly on top of the bed frame and ensure that the
CPR is at the head of the bed. Secure the mattress using the straps at the base.
CAUTION: When securing the mattress to the bed, please ensure that you are securing
onto the movable parts of the bed and NOT the actual bed frame, as this will obstruct the
mechanical movement and could cause damage to both mattress and bed. The warranty for
both the mattress and the bed may well be invalidated if damage is caused by this means.
NOTE: When the mattress is opened for the first time, please write today’s date
(with a non-Phenol based pen) in the top white box on the PU cover and add in the ‘same
date’ for the following three years in the bottom white box. This will remind the care team
when the annual service is due.
2. Hang the hand set on to the bed rail or mattress platform and plug the power cord into the mains
outlet. Ensure that electrical cables are safe and tidy and are not caught in the bed frame and free
from obstruction. The power LED will be at standby mode with amber light illuminating.
CAUTION: it is important to routinely inspect power cable to ensure it is not obstructing or
causing a tripping hazard. Check the power cable is not under strain or damaged.
3. Ensure that the CPR valve is set to ‘ CLOSE ’ position.
4. Turn the power on from the handset (Green LED illuminated)
5. When the Steiss™ Universal Therapy System (UTS) is turned on, the pump will start to inflate the mattress
for around 30 minutes in alternating mode. During this inflation period the ‘AF’ (Auto Firm) will be displayed
on the LED window to indicate the mattress is not ready to use.
CAUTION: It is important to ensure that no person/ object is lying/ sitting on the mattress
when it is being inflated.
Turn the dial
to ‘
CLOSE’
position to inflate
the air mattress.