STEINWAY LYNGDORF SP-1, Руководство по установке

Страница: 15 / 50

15
Plug the supplied microphone cable into the microphone.
Connect the microphone cable to the microphone terminal on the rear panel of your
processor.
Placing the Microphone in the Focus Position
When you are prompted to place the microphone in the focus position, connect the
microphone to the microphone input on the back panel and place the microphone, using the
microphone stand, in your primary listening position. The height and the orientation of the
microphone should correspond to your head’s height and direction.
Press enter and a test signal will start from the left speaker. The system will give an
estimated optimal volume for calibrating the system or will accept the current volume. Adjust
the volume if required and retry the measurement.
The calibration volume should not be so loud that it is inconvenient to you, or that it causes
damage to your loudspeakers. If this is the case, set it to a lower and more appropriate level.
A low volume can result in a longer calibration time or a measurement time out. A low
volume and long measurement will not affect the quality of the end result.