STEINWAY LYNGDORF CDP-1, Руководство по установке

Страница: 10 / 10

10
TECHNICAL SPECIFICATIONS
All audio measurements, except frequency response, are measured with a 20KHz low-pass filter in
accordance with AES-17. Measured on unbalanced outputs - RCA (phono).
Digital audio outputs
Parameter Value Note
SPDIF, Toslink Galvanically isolated transformer
coupled SPDIF
Selectable
outputs: sample rates on digital 48 / 96 / 192 kHz – 24bits
Protection
Parameter Value Note
Grounding Mains earth, chassis and
audio ground are connected
internally.
Mains
Parameter Value Note
Mains input connector IEC 320 cold type Mains lead supplied
Mains voltage range 100-240 AC, 50–60Hz
Internal mains fuse T630mAh / 250VAC
Power consumption 300mW STANDBY mode
Power consumption 11W OPERATE mode, Playing CD
Mains Connector
Mains voltage to the CDP-1 is applied via an IEC320 type connector. The supplied cable with safety
ground should be used to connect the CDP-1 to a mains outlet.
Technical Assistance
If you have any problems with or questions regarding your Steinway Lyngdorf product, please contact
your nearest Steinway Lyngdorf representative.
Connect the power input only to the AC source printed on the label and the setting
shown on the voltage selector switch. The warranty will not cover any damage caused
by connecting to the wrong type of AC mains.
Always disconnect the CDP-1 from the mains before changing any connections to its
inputs or outputs.